Now we’re ready to backup some data. The contents of a directory at a specific point in time is called a “snapshot” in restic. Run the following command and enter the repository password you chose above again:
$ restic -r /srv/restic-repo --verbose backup ~/work open repository enter password for repository: password is correct lock repository load index files start scan start backup scan finished in 1.837s processed 1.720 GiB in 0:12 Files: 5307 new, 0 changed, 0 unmodified Dirs: 1867 new, 0 changed, 0 unmodified Added: 1.200 GiB snapshot 40dc1520 saved
As you can see, restic created a backup of the directory and was pretty
fast! The specific snapshot just created is identified by a sequence of
40dc1520 in this case.
You can see that restic tells us it processed 1.720 GiB of data, this is the
size of the files and directories in
~/work on the local file system. It
also tells us that only 1.200 GiB was added to the repository. This means that
some of the data was duplicate and restic was able to efficiently reduce it.
If you don’t pass the
--verbose option, restic will print less data. You’ll
still get a nice live status display. Be aware that the live status shows the
processed files and not the transferred data. Transferred volume might be lower
(due to de-duplication) or higher.
On Windows, the
--use-fs-snapshot option will use Windows’ Volume Shadow Copy
Service (VSS) when creating backups. Restic will transparently create a VSS
snapshot for each volume that contains files to backup. Files are read from the
VSS snapshot instead of the regular filesystem. This allows to backup files that are
exclusively locked by another process during the backup.
By default VSS ignores Outlook OST files. This is not a restriction of restic but the default Windows VSS configuration. The files not to snapshot are configured in the Windows registry under the following key:
For more details refer the official Windows documentation e.g. the article
Registry Keys and Values for Backup and Restore.
If you run the backup command again, restic will create another snapshot of your data, but this time it’s even faster and no new data was added to the repository (since all data is already there). This is de-duplication at work!
$ restic -r /srv/restic-repo --verbose backup ~/work open repository enter password for repository: password is correct lock repository load index files using parent snapshot d875ae93 start scan start backup scan finished in 1.881s processed 1.720 GiB in 0:03 Files: 0 new, 0 changed, 5307 unmodified Dirs: 0 new, 0 changed, 1867 unmodified Added: 0 B snapshot 79766175 saved
You can even backup individual files in the same repository (not passing
--verbose means less output):
$ restic -r /srv/restic-repo backup ~/work.txt enter password for repository: password is correct snapshot 249d0210 saved
If you’re interested in what restic does, pass
--verbose twice (or
--verbose=2) to display detailed information about each file and directory
$ echo 'more data foo bar' >> ~/work.txt $ restic -r /srv/restic-repo --verbose --verbose backup ~/work.txt open repository enter password for repository: password is correct lock repository load index files using parent snapshot f3f8d56b start scan start backup scan finished in 2.115s modified /home/user/work.txt, saved in 0.007s (22 B added) modified /home/user/, saved in 0.008s (0 B added, 378 B metadata) modified /home/, saved in 0.009s (0 B added, 375 B metadata) processed 22 B in 0:02 Files: 0 new, 1 changed, 0 unmodified Dirs: 0 new, 2 changed, 0 unmodified Data Blobs: 1 new Tree Blobs: 3 new Added: 1.116 KiB snapshot 8dc503fc saved
In fact several hosts may use the same repository to backup directories and files leading to a greater de-duplication.
Now is a good time to run
restic check to verify that all data
is properly stored in the repository. You should run this command regularly
to make sure the internal structure of the repository is free of errors.
File change detection¶
When restic encounters a file that has already been backed up, whether in the current backup or a previous one, it makes sure the file’s contents are only stored once in the repository. To do so, it normally has to scan the entire contents of every file. Because this can be very expensive, restic also uses a change detection rule based on file metadata to determine whether a file is likely unchanged since a previous backup. If it is, the file is not scanned again.
Change detection is only performed for regular files (not special files, symlinks or directories) that have the exact same path as they did in a previous backup of the same location. If a file or one of its containing directories was renamed, it is considered a different file and its entire contents will be scanned again.
Metadata changes (permissions, ownership, etc.) are always included in the backup, even if file contents are considered unchanged.
On Unix (including Linux and Mac), given that a file lives at the same location as a file in a previous backup, the following file metadata attributes have to match for its contents to be presumed unchanged:
- Modification timestamp (mtime).
- Metadata change timestamp (ctime).
- File size.
- Inode number (internal number used to reference a file in a filesystem).
The reason for requiring both mtime and ctime to match is that Unix programs can freely change mtime (and some do). In such cases, a ctime change may be the only hint that a file did change.
restic backup command line flags modify the change detection
--force: turn off change detection and rescan all files.
--ignore-ctime: require mtime to match, but allow ctime to differ.
--ignore-inode: require mtime to match, but allow inode number and ctime to differ.
--ignore-inode exists to support FUSE-based filesystems and
pCloud, which do not assign stable inodes to files.
Note that the device id of the containing mount point is never taken into account. Device numbers are not stable for removable devices and ZFS snapshots. If you want to force a re-scan in such a case, you can change the mountpoint.
On Windows, a file is considered unchanged when its path, size
and modification time match, and only
--force has any effect.
The other options are recognized but ignored.
You can perform a backup in dry run mode to see what would happen without modifying the repo.
-nReport what would be done, without writing to the repository
--verbose, you can see a list of changes:
$ restic -r /srv/restic-repo backup ~/work --dry-run -vv | grep "added" modified /plan.txt, saved in 0.000s (9.110 KiB added) modified /archive.tar.gz, saved in 0.140s (25.542 MiB added) Would be added to the repo: 25.551 MiB
You can exclude folders and files by specifying exclude patterns, currently the exclude options are:
--excludeSpecified one or more times to exclude one or more items
--excludebut ignores the case of paths
--exclude-cachesSpecified once to exclude folders containing a special file
--exclude-fileSpecified one or more times to exclude items listed in a given file
exclude-filebut ignores cases like in
--exclude-if-present fooSpecified one or more times to exclude a folder’s content if it contains a file called
foo(optionally having a given header, no wildcards for the file name supported)
--exclude-larger-than sizeSpecified once to excludes files larger than the given size
restic help backup for more specific information about each exclude option.
Let’s say we have a file called
excludes.txt with the following content:
# exclude go-files *.go # exclude foo/x/y/z/bar foo/x/bar foo/bar foo/**/bar
It can be used like this:
$ restic -r /srv/restic-repo backup ~/work --exclude="*.c" --exclude-file=excludes.txt
This instructs restic to exclude files matching the following criteria:
- All files matching
- All files matching
*.go(second line in
- All files and sub-directories named
barwhich reside somewhere below a directory called
foo(fourth line in
Patterns use filepath.Glob internally,
see filepath.Match for
syntax. Patterns are tested against the full path of a file/dir to be saved,
even if restic is passed a relative path to save. Empty lines and lines
starting with a
# are ignored.
Environment variables in exclude files are expanded with os.ExpandEnv, so
/home/$USER/foo will be
/home/bob/foo for the user
bob. To get a literal dollar
$$ to the file - this has to be done even when there’s no
matching environment variable for the word following a single
that tilde (
~) is not expanded, instead use the
$HOME or equivalent
environment variable (depending on your operating system).
Patterns need to match on complete path components. For example, the pattern
- does not match
/ is ignored, a leading
/ anchors the pattern at the root directory.
/bin/bash but does not match
Regular wildcards cannot be used to match over the directory separator
/bin/bash but does not match
/bin/ash. For this,
the special wildcard
** can be used to match arbitrary sub-directories: The
Spaces in patterns listed in an exclude file can be specified verbatim. That is,
in order to exclude a file named
foo bar star.txt, put that just as it reads
on one line in the exclude file. Please note that beginning and trailing spaces
are trimmed - in order to match these, use e.g. a
* at the beginning or end
of the filename.
Spaces in patterns listed in the other exclude options (e.g.
--exclude on the
command line) are specified in different ways depending on the operating system
and/or shell. Restic itself does not need any escaping, but your shell may need
some escaping in order to pass the name/pattern as a single argument to restic.
On most Unixy shells, you can either quote or use backslashes. For example:
--exclude='foo bar star/foo.txt'
--exclude="foo bar star/foo.txt"
--exclude=foo\ bar\ star/foo.txt
If a pattern starts with exclamation mark and matches a file that
was previously matched by a regular pattern, the match is cancelled.
It works similarly to
gitignore, with the same limitation: once a
directory is excluded, it is not possible to include files inside the
directory. Here is a complete example to backup a selection of
directories inside the home directory. It works by excluding any
directory, then selectively add back some of them.
$HOME/**/* !$HOME/Documents !$HOME/code !$HOME/.emacs.d !$HOME/games # [...] node_modules *~ *.o *.lo *.pyc
By specifying the option
--one-file-system you can instruct restic
to only backup files from the file systems the initially specified files
or directories reside on. In other words, it will prevent restic from crossing
filesystem boundaries and subvolumes when performing a backup.
For example, if you backup
/ with this option and you have external
media mounted under
/media/usb then restic will not back up
at all because this is a different filesystem than
/. Virtual filesystems
/proc are also considered different and thereby excluded when
$ restic -r /srv/restic-repo backup --one-file-system /
Please note that this does not prevent you from specifying multiple filesystems on the command line, e.g:
$ restic -r /srv/restic-repo backup --one-file-system / /media/usb
will back up both the
/media/usb filesystems, but will not
include other filesystems like
--one-file-system is currently unsupported on Windows, and will
cause the backup to immediately fail with an error.
Files larger than a given size can be excluded using the –exclude-larger-than option:
$ restic -r /srv/restic-repo backup ~/work --exclude-larger-than 1M
This excludes files in
~/work which are larger than 1 MB from the backup.
The default unit for the size value is bytes, so e.g.
would exclude files larger than 2048 bytes (2 kilobytes). To specify other units,
suffix the size value with one of
K for kilobytes,
M for megabytes,
G for gigabytes and
T for terabytes (e.g.
allow you to give restic a file containing lists of file patterns or paths to
be backed up. This is useful e.g. when you want to back up files from many
different locations, or when you use some other software to generate the list
of files to back up.
The argument passed to
--files-from must be the name of a text file that
contains one pattern per line. The file must be encoded as UTF-8, or UTF-16
with a byte-order mark. Leading and trailing whitespace is removed from the
patterns. Empty lines and lines starting with a
# are ignored and each
pattern is expanded when read, such that special characters in it are expanded
using the Go function filepath.Glob
- please see its documentation for the syntax you can use in the patterns.
The argument passed to
--files-from-verbatim must be the name of a text file
that contains one path per line, e.g. as generated by GNU
find with the
--files-from-verbatim does not
expand any special characters in the list of paths, does not strip off any
whitespace and does not ignore lines starting with a
#. This option simply
reads and uses each line as-is, although empty lines are still ignored. Use this
option when you want to backup a list of filenames containing the special
characters that would otherwise be expanded when using
--files-from-raw option is a variant of
requires each line in the file to be terminated by an ASCII NUL character (the
\0 zero byte) instead of a newline, so that it can even handle file paths
containing newlines in their name or are not encoded as UTF-8 (except on
Windows, where the listed filenames must still be encoded in UTF-8. This option
is the safest choice when generating the list of filenames from a script (e.g.
find with the
All three options interpret the argument
- as standard input and will read
the list of files/patterns from there instead of a text file.
In all cases, paths may be absolute or relative to
restic backup’s working
For example, maybe you want to backup files which have a name that matches a
certain regular expression pattern (uses GNU
$ find /tmp/some_folder -regex PATTERN -print0 > /tmp/files_to_backup
You can then use restic to backup the filtered files:
$ restic -r /srv/restic-repo backup --files-from-raw /tmp/files_to_backup
You can combine all three options with each other and with the normal file arguments:
$ restic backup --files-from /tmp/files_to_backup /tmp/some_additional_file $ restic backup --files-from /tmp/glob-pattern --files-from-raw /tmp/generated-list /tmp/some_additional_file
Restic has a diff command which shows the difference between two snapshots and displays a small statistic, just pass the command two snapshot IDs:
$ restic -r /srv/restic-repo diff 5845b002 2ab627a6 password is correct comparing snapshot ea657ce5 to 2ab627a6: C /restic/cmd_diff.go + /restic/foo C /restic/restic Files: 0 new, 0 removed, 2 changed Dirs: 1 new, 0 removed Others: 0 new, 0 removed Data Blobs: 14 new, 15 removed Tree Blobs: 2 new, 1 removed Added: 16.403 MiB Removed: 16.402 MiB
Backing up special items and metadata¶
Symlinks are archived as symlinks,
restic does not follow them.
When you restore, you get the same symlink again, with the same link target
and the same timestamps.
If there is a bind-mount below a directory that is to be saved, restic descends into it.
Device files are saved and restored as device files. This means that e.g.
archived as a block device file and restored as such. This also means that the content of the
corresponding disk is not read, at least not from the device file.
By default, restic does not save the access time (atime) for any files or other
items, since it is not possible to reliably disable updating the access time by
restic itself. This means that for each new backup a lot of metadata is
written, and the next backup needs to write new metadata again. If you really
want to save the access time for files and directories, you can pass the
--with-atime option to the
restic does not back up some metadata associated with files. Of
particular note are:
- file creation date on Unix platforms - inode flags on Unix platforms - file ownership and ACLs on Windows - the "hidden" flag on Windows
Reading data from stdin¶
Sometimes it can be nice to directly save the output of a program, e.g.
mysqldump so that the SQL can later be restored. Restic supports
this mode of operation, just supply the option
--stdin to the
backup command like this:
$ set -o pipefail $ mysqldump [...] | restic -r /srv/restic-repo backup --stdin
This creates a new snapshot of the output of
mysqldump. You can then
use e.g. the fuse mounting option (see below) to mount the repository
and read the file.
By default, the file name
stdin is used, a different name can be
--stdin-filename, e.g. like this:
$ mysqldump [...] | restic -r /srv/restic-repo backup --stdin --stdin-filename production.sql
pipefail is highly recommended so that a non-zero exit code from
one of the programs in the pipe (e.g.
mysqldump here) makes the whole chain
return a non-zero exit code. Refer to the Use the Unofficial Bash Strict Mode for more
details on this.
Restic does not have a built-in way of scheduling backups, as it’s a tool that runs when executed rather than a daemon. There are plenty of different ways to schedule backup runs on various different platforms, e.g. systemd and cron on Linux/BSD and Task Scheduler in Windows, depending on one’s needs and requirements. When scheduling restic to run recurringly, please make sure to detect already running instances before starting the backup.
Restic currently assumes that your backup repository has sufficient space for the backup operation you are about to perform. This is a realistic assumption for many cloud providers, but may not be true when backing up to local disks.
Should you run out of space during the middle of a backup, there will be some additional data in the repository, but the snapshot will never be created as it would only be written at the very (successful) end of the backup operation. Previous snapshots will still be there and will still work.
In addition to command-line options, restic supports passing various options in environment variables. The following lists these environment variables:
RESTIC_REPOSITORY_FILE Name of file containing the repository location (replaces --repository-file) RESTIC_REPOSITORY Location of repository (replaces -r) RESTIC_PASSWORD_FILE Location of password file (replaces --password-file) RESTIC_PASSWORD The actual password for the repository RESTIC_PASSWORD_COMMAND Command printing the password for the repository to stdout RESTIC_KEY_HINT ID of key to try decrypting first, before other keys RESTIC_CACHE_DIR Location of the cache directory RESTIC_PROGRESS_FPS Frames per second by which the progress bar is updated TMPDIR Location for temporary files AWS_ACCESS_KEY_ID Amazon S3 access key ID AWS_SECRET_ACCESS_KEY Amazon S3 secret access key AWS_DEFAULT_REGION Amazon S3 default region AWS_PROFILE Amazon credentials profile (alternative to specifying key and region) AWS_SHARED_CREDENTIALS_FILE Location of the AWS CLI shared credentials file (default: ~/.aws/credentials) ST_AUTH Auth URL for keystone v1 authentication ST_USER Username for keystone v1 authentication ST_KEY Password for keystone v1 authentication OS_AUTH_URL Auth URL for keystone authentication OS_REGION_NAME Region name for keystone authentication OS_USERNAME Username for keystone authentication OS_USER_ID User ID for keystone v3 authentication OS_PASSWORD Password for keystone authentication OS_TENANT_ID Tenant ID for keystone v2 authentication OS_TENANT_NAME Tenant name for keystone v2 authentication OS_USER_DOMAIN_NAME User domain name for keystone authentication OS_USER_DOMAIN_ID User domain ID for keystone v3 authentication OS_PROJECT_NAME Project name for keystone authentication OS_PROJECT_DOMAIN_NAME Project domain name for keystone authentication OS_PROJECT_DOMAIN_ID Project domain ID for keystone v3 authentication OS_TRUST_ID Trust ID for keystone v3 authentication OS_APPLICATION_CREDENTIAL_ID Application Credential ID (keystone v3) OS_APPLICATION_CREDENTIAL_NAME Application Credential Name (keystone v3) OS_APPLICATION_CREDENTIAL_SECRET Application Credential Secret (keystone v3) OS_STORAGE_URL Storage URL for token authentication OS_AUTH_TOKEN Auth token for token authentication B2_ACCOUNT_ID Account ID or applicationKeyId for Backblaze B2 B2_ACCOUNT_KEY Account Key or applicationKey for Backblaze B2 AZURE_ACCOUNT_NAME Account name for Azure AZURE_ACCOUNT_KEY Account key for Azure GOOGLE_PROJECT_ID Project ID for Google Cloud Storage GOOGLE_APPLICATION_CREDENTIALS Application Credentials for Google Cloud Storage (e.g. $HOME/.config/gs-secret-restic-key.json) RCLONE_BWLIMIT rclone bandwidth limit
See Caching for the rules concerning cache locations when
RESTIC_CACHE_DIR is not set.
The external programs that restic may execute include
rclone (for rclone
ssh (for the SFTP backend). These may respond to further
environment variables and configuration files; see their respective manuals.
Exit status codes¶
Restic returns one of the following exit status codes after the backup command is run:
- 0 when the backup was successful (snapshot with all source files created)
- 1 when there was a fatal error (no snapshot created)
- 3 when some source files could not be read (incomplete snapshot with remaining files created)
Fatal errors occur for example when restic is unable to write to the backup destination, when there are network connectivity issues preventing successful communication, or when an invalid password or command line argument is provided. When restic returns this exit status code, one should not expect a snapshot to have been created.
Source file read errors occur when restic fails to read one or more files or directories that it was asked to back up, e.g. due to permission problems. Restic displays the number of source file read errors that occurred while running the backup. If there are errors of this type, restic will still try to complete the backup run with all the other files, and create a snapshot that then contains all but the unreadable files.
One can use these exit status codes in scripts and other automation tools, to make them aware of
the outcome of the backup run. To manually inspect the exit code in e.g. Linux, run